AmbiCom WL1100B-AP Anleitung zur Fehlerbehebung PDF herunterladen (Seite 135)

125

Troubleshooting Guide

Numbered Errors

Error 619

This error is typically reported when attempting to connect to an EDGE or

GPRS network. This error indicates a failure during the call setup.

Resolution

Click on the Cancel button and wait for the Communication Manager to

display "Ready to Connect" Then try again.

Error 630

Using a cellular handset as your wireless device

This error is typically reported when the your phone or other wireless

device has been removed or has not been setup properly. Make sure the

device you are using for the current connection is properly attached to your

PC. It may be necessary to verify the phone or device setup.

Using a PC Card as your wireless device

This error is typically reported if Communication Manager has detected a

hardware error in the PC Card. Click on the Cancel button and wait for

Communication Manager to display "Ready to Connect" If this error

continues to be displayed turn your computer off then on. This error may

also be displayed if the PC Card is not properly inserted. Make sure the PC

Card is secure in its slot.

Error 631

This error is typically seen if you disconnect or cancel an EDGE/GPRS

connection prior to authentication. In this case, the application is merely

informing you that it didn't expect you to disconnect at this stage.

However, there is no actual failure. You should be able to re-connect at any

time.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 155 156

Keine Kommentare

AmbiCom WL1100B-AP Anleitung zur Fehlerbehebung Seite 135